FAQ
      Back to home
      1. Help Center
      2. LightControl
      3. FAQ

      How to set up your LightControl

      Step by step method

      1. Make sure your IT department has opened SSH/port 22 on your allocated ethernet socket. This ensures a safe connection between your device and endoscopemanager.com. Ask us for the latest specsheet regarding connectivity.
      2. Place your monitor and power it on and connect it via HDMI.
      3. Unpack your LightControl, place it on the table and check for possible transportation damage
      4. Connect the power cable to the electricity outlet and to your LightControl.
      5. Plug your UTP cable into the allocated ethernet socket. 
      6. Now switch your LightControl on. The DoviCircle on top of the left header module will show you progress. You can find more information about the DoviCircle indicators here.
      7. Connect DoviSCAN and plug the cable into the USB port of your LightControl. Your DoviScan will turn blue and beep
      8. LightControl is done setting up when you see the DoviCircle breathing.
      9. Push the sphere module to its starting position on the right.
      10. You can now start testing.

      But you can also check out our video.